I'm The Only One With Genius DNA

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#The-Sister-of-the-Woods-With-a-Thousand-Young.

#Whats-wrong-with-the-secretary-Kimtal tiernuchi

#Whats-wrong-with-the-secretary-Kimme gusto

#Whats-wrong-with-the-secretary-Kim😋👍

#Whats-wrong-with-the-secretary-Kim😍

#One Piece 👑 #One Piece

Analysis of the Causes of 3D Printer Resin Cracking Problems
Resin 3d printing materials cracking is mainly divided into the following reasons:
1. The concentration of cleaning agent used in the cleaning process is not enough, and the residual 3D printer resin invades the surface of the printed part, making the surface of the printed part inconsistent with the internal stress, resulting in cracked surface cracking.https://www.esun3d.com/

2. The model has been hollowed out inside, there is a large amount of uncured resin 3d printing materials , and the interior is not completely cleaned with alcohol, or the wall thickness of the model after hollowing out is not enough (less than 3mm), and the thin-walled model will be damaged due to the uncured interior. The stress and the solidified thin wall produce molecular structure pulling, which leads to the overall collapse of the model.

3. Put the 3d printer resin model under a UV lamp of more than 30W for close-range one-way curing for a long time. Excessive secondary curing will cause uneven internal and external stress or inconsistent light reception before and after, resulting in interlayer cracking.

4. Do not blow dry the alcohol after cleaning, let the resin 3d printing materials model dry naturally and place it in the sun to receive light from one direction, forming deformation and cracking caused by strong pulling on the surface and internal stress.

5. Care should be taken when using water washable resin. https://www.esun3d.com/water-washable-resin-product/

Do not wash in water for a long time. After cleaning, dry it with a hair dryer as soon as possible. When storing the water washable resin model, avoid humid and high-temperature environments.

Things To Consider Before Purchasing Hydraulic Hose Crimper

What are the things that you should consider before getting a Hydraulic hose crimper? Read the points for a better idea.

A Hydraulic Hose crimper bought for a prolonged duration. Therefore, before deciding on a brand, one should perpetually consider the following tips:

• Inspect the reputation of the brand based on the consistent performance of the machine.
• Verify with current buyers, the response of the organization to after-sales assistance calls.
• Several traders pretend to be producers and sell inexpensive imported machines. They will never acknowledge or reply if any difficulty occurs in the future.
• The critical component of the Hose Crimper is the dies and Cylinder Head. Check with current consumers if the dies have disfigured, even slightly.
• The motor should be of the reputed brand which has service centers throughout the country.
• Check the make of components like Hydraulic Pumps, Valves, and electrical parts.
• Check the system of depth control installed. The accuracy should be in the range of 0.05 mm
• It is a practice by some manufacturers to demonstrate the capacity of the machine by pressing a hollow pipe. Please remember that this is to mislead the customer. Insist on having the hydraulic hose and hydraulic hose fittings of the maximum dimensions crimped to ascertain the capacity.
• Do not fall victim to the marketing techniques of some companies since a manufacturer will always try to sell his product. Customers need to be smart.